1 7/8" DIAMETER, 31" LONG PRIMARY FULL LENGTH HEADERS FOR C6 AND Z06. TUNED LENGTH DESIGN WITH D SHAPED PORT MATCHED FLANGE. 3" COLLECTORS, TIG WELDED. INCLUDES (2) 24" O2 EXTENSIONS, (2) 36" REAR O2 EXTENSIONS, 3" X PIPE, OFF ROAD PIPES, (2) METALLIC SUBSTRATE RANDOM TECHNOLOGY HIGH FLOW CONVERTERS (NOT SHOWN), (8) 3" ACCUSEAL CLAMPS, (2) BAND CLAMP/HANGER ASSEMBLIES, (2) OIL COOLER LINES, (2) 3/8 TO 1/4 PIPE 90 DEGREE COMPRESSION FITTINGS, (1) 1/2 TO 1/4 PIPE COMP. FITTING, (1) 3/8 TO 1/4" PIPE COMP FITTING, (12) 15" ZIP TIES, (4) 3/8" CABLE CLAMPS, (2) 1/4" CABLE CLAMPS, (1) 1 1/2 CABLE CLAMP, (1) 10MM x 1.5 x 1/2" BOLT. OFF ROAD SYSTEM WILL REQUIRE TURNING OFF REAR O2 SENSORS OR RUNNING O2 SIMULATORS. THE MOST POWERFUL LS7 HEADERS AVAILABLE! FOR CARS RUNNING BOLT ONS OR COMPLETELY STOCK. THESE WILL REQUIRE DROPPING THE FRONT CRADLE AND RE-ROUTING THE OIL COOLER LINES BUT THE POWER THEY MAKE IS WELL WORTH THE EFFORT. ALL PARTS REQUIRED FOR INSTALL ARE INCLUDED. OUR 2" HEADERS WERE DYNO TESTED ON A STOCK '06 Z06, THESE HEADERS PICKED UP 29 RWHP AND 41 FT# WITH NO TUNING!!! WHEN USED WITH A STAINLESS WORKS 3" CAT BACK, THESE PARTS ALSO WEIGH 40 LBS LESS THAN THE STOCK MANIFOLDS AND EXHAUST SYSTEM!!!
A Stainless Works product.
