Blasphemy! That’s what most people
say when you tell them you want a single disc clutch that will hold
900hp/tq! Impossible! That’s another term that comes to mind. Well,
there are only a few of you guys out there that are crazy enough to
push your LS based motor to this point and still be bangin’ gears! So,
if I’m talking to you, get in here!
This clutch is a
bad ass, plain and simple! We take so much pride in this piece the
whole place goes up when we sell ‘em! First, we know someone is
serious about their car! Second, we know that there isn’t another
manufacturer out there that can put this rating on a single disc
clutch and still give it a warranty (let alone still be in business)!
Building off of our knowledge and testing on the Level 5, we decide to
really test our Extreme pressure plate. First thing we did was
package a (would be) Level 6 up and send it to our engineers that have
the “clutch dyno”. We figured that the Extreme pressure plate, 12”
sintered iron disc and SFI certified billet steel flywheel would do us
proud, and we couldn’t have been more right! Sure, you can do the
math with the pressure plate ratings on the diaphragm springs,
coefficient of friction rating on the friction material, and size of
the disc, etc. But what we wanted to know was, can it really hold?
Well, after a long wait and some more hard earned cash, the answer is…
hell yes! It takes 900hp/tq without hesitation! We installed it in
some test cars, still no worries! This is, hands down, the best single
disc clutch on the market today! So, if you make that magic 900hp/tq
or less, pick one of these beasts up!
This clutch is
rated at 900hp/tq. It’ll take as much of your 900hp/tq as you can
throw at it. The material on this clutch, mixed with our Extreme
pressure plate, will make for one serious street clutch. Don’t fear
it, you can drive it daily and it won’t make your left calf muscle
bigger than the right one. If for some reason you make this clutch
fail, you should have bought our twin or triple disc! Warning: This
clutch will find weak points in the drive train, if you have an
inadequate drive train there will be failures!
Our Basic Package
includes the following:
Extreme pressure plate, 12" sintered iron 6 puck disc, 28lbs SFI
certified billet steel flywheel or a 18lbs SFI certified light weight
flywheel (your choice), pilot bearing, release bearing (unless it's the
C6 package), and alignment tool.
Our Premium Package includes the following:
Extreme pressure plate, 12" sintered iron 6 puck disc, 28lbs SFI
certified billet steel flywheel or a 18lbs SFI certified light weight
flywheel (your choice), pilot bearing, release bearing, slave cylinder,
and alignment tool.
FREE SHIPPING!